Hi, Currently we are undergoing a lot of changes in master (19.04). We have migrated jvpp outside of vpp to separate project, And also we are migrating to java 11 and Ubuntu bionic. If you want to

Hi, I have just started exploring hc2vpp to be used as management agent for VPP. I see that build is failing. Please help to proceed further. Please point to any updated steps for clean build of

Hi All, FD.io CSIT-1901 report has been published on FD.io docs site: html: https://docs.fd.io/csit/rls1901/report/ pdf:

Hi, Thanks for the feedback. I will try to get to it asap and I will get back to you. Michal Cmarada Engineer - Software mcmarada@... Tel: Cisco Systems, Inc. Slovakia cisco.com Think

Hi everyone, We have added list of features to our HC2VPP wiki page under Supported Features: https://wiki.fd.io/view/Hc2vpp or use this direct

Hello all, One more observation: When I add classify table for source with parameter 'skip_n_vectors' =0( corresponding CLI : classify table mask l3 ip4 src) using API the match parameter has the IP

Hello all, I am trying out classify session using RESTCONF API and I am not getting expected results. To verify, I used the following CLI command to configure classify session first classify

Congratulations Michal and all contributers! A welcome release for the FD.io community. -daw- On 02/07/2019 11:01 AM, Michal Cmarada via Lists.Fd.Io wrote:

The hc2vpp 1.19.01 is released All hc2vpp artifacts (JARs, Ubuntu 1604 DEB, CentOS7 RPM) are uploaded to nexus server. More details can be found in release

Jenkins restart is complete.  Please open an RT ticket if you experience any additional issues. Thank you, Vanessa

We have placed Jenkins into shutdown mode. It will require a restart to resolve slowness. We'll do the restart at the top of the hour.  Please let us know as soon as possible if there are any builds

Hi Michal, Thanks for the fixes. I’ll merge them when they verify. /Neale De :<vpp-dev@...> au nom de "Michal Cmarada via Lists.Fd.Io" <mcmarada=cisco.com@...> Répondre à : "Michal

Hi, I was testing IpSec API via honeycomb and when we called ikev2_set_profile_auth with “data” and “data_length” set, vpp crashed. When investigating we found out that “data_length”

Hi, I fixed the documentation for 19.01, Thanks for noticing. Michal

<rajlistuser=gmail.com@...> wrote: As of now the release notes does not show the correct URL of the postman

TECHNOLOGIES at Cisco) <mcmarada@...> wrote: Thanks, will check this out and see if it suits. Thanks and Regards, Raj

Hi, I checked our jira issues and found https://jira.fd.io/browse/HC2VPP-33. It refers to routing_advertisements_postman_collection.json in routing module. Check if this suits your needs.

Hi, If I remember correctly we support only "set ip6 nd proxy" and "set ip6 neighbor" both examples should be in L3 postman collection. I will check, but I suppose this feature is missing. If

Hello all, I am able to configure SLAAC using ip6 nd command: vpp# ip6 nd TenGigabitEthernet82/0/0 prefix 2001:xxx:xxxx:xxx::0/64 default vpp# sh ip6 interface TenGigabitEthernet82/0/0 But did not

TECHNOLOGIES at Cisco) <mcmarada@...> wrote: Thanks, that makes sense. Understood. Thanks and Regards, Raj