Thanks Marek that worked ...but the vbd-odl app still does not populate its interfaces...despite showing connected. I filed a bug in Jira

https://jira.opendaylight.org/browse/HONEYVBD-23?focusedCommentId=61122&page=com.atlassian.jira.plugin.system.issuetabpanels%3Acomment-tabpanel

On Tue, Feb 20, 2018 at 7:07 PM, Kawshik Sarkar <kawshikrandom@...> wrote:

Thanks Marek That worked.

On Fri, Feb 16, 2018 at 6:50 AM, Marek Gradzki -X (mgradzki - PANTHEON TECHNOLOGIES at Cisco) <mgradzki@...> wrote:

Hi,

 

by default Honeycomb persists configuration and restores it on startup.

 

You can disable this behavior in the:

/opt/honeycomb/config/honeycomb.json if you want.

 

If you want to delete persisted configuration, just

rm -rf /var/lib/honeycomb/ before starting honeycomb.

 

Regards,

Marek

 

From: hc2vpp@... [mailto:hc2vpp@...] On Behalf Of Kawshik Sarkar
Sent: 15 lutego 2018 16:07
To: hc2vpp@...
Cc: hc2vpp@...; honeycomb-dev@...
Subject: Re: [hc2vpp] Again the repo got updated and is non compliant

 

Thanks a lot for your input.

I tried Dave's approach first. Despite the fact that I did install the right version this time . The honeycomb install alert was still the same. (which i dont understand why ) to be honest.

I updated the artifact as marek suggested and that seemed to work. At this point I really have no logical explanation to anything anymore.

Furthermore, the whole reason why i removed vpp in the first place was because my ODL vbd was not updating its  interfaces since i did a postman config.Infact not showing any interfaces at all since a postman config was done.Furthermore if you check my attachment you will find despite a vpp and honeycomb reinstall the postman interface configuration still remains inside vpp.How do i flush it out?

 

 

On Wed, Feb 14, 2018 at 9:55 PM Dave Wallace <dwallacelf@...> wrote:

Assuming that you have followed the install VPP from binary recipe [1], then you can install vpp 18.01-release artifacts as follows:

sudo apt-get install vpp=18.01-release vpp-lib=18.01-release

Hope this helps,
-daw-

[1] https://wiki.fd.io/view/VPP/Installing_VPP_binaries_from_packages

 

On 02/14/2018 06:35 PM, Kawshik Sarkar wrote:

Hi,

Again the vpp latest stable has gotten updated and is non compliant with hc current  repo.

Please check attachment upper half.

I used this repo:
https://nexus.fd.io/content/repositories/fd.io.ubuntu.xenial.main/

Whats a workaround in these situations. I know which version i want but doing

sudo apt-get install vpp

just installs the latest and the greatest.

Is there a workaround. I know which vpp version to get but how do i get it?

BR

Kawshik

 

Thanks Marek That worked.

On Fri, Feb 16, 2018 at 6:50 AM, Marek Gradzki -X (mgradzki - PANTHEON TECHNOLOGIES at Cisco) <mgradzki@...> wrote:

Hi,

 

by default Honeycomb persists configuration and restores it on startup.

 

You can disable this behavior in the:

/opt/honeycomb/config/honeycomb.json if you want.

 

If you want to delete persisted configuration, just

rm -rf /var/lib/honeycomb/ before starting honeycomb.

 

Regards,

Marek

 

From: hc2vpp@... [mailto:hc2vpp@...] On Behalf Of Kawshik Sarkar
Sent: 15 lutego 2018 16:07
To: hc2vpp@...
Cc: hc2vpp@...; honeycomb-dev@...
Subject: Re: [hc2vpp] Again the repo got updated and is non compliant

 

Thanks a lot for your input.

I tried Dave's approach first. Despite the fact that I did install the right version this time . The honeycomb install alert was still the same. (which i dont understand why ) to be honest.

I updated the artifact as marek suggested and that seemed to work. At this point I really have no logical explanation to anything anymore.

Furthermore, the whole reason why i removed vpp in the first place was because my ODL vbd was not updating its  interfaces since i did a postman config.Infact not showing any interfaces at all since a postman config was done.Furthermore if you check my attachment you will find despite a vpp and honeycomb reinstall the postman interface configuration still remains inside vpp.How do i flush it out?

 

 

On Wed, Feb 14, 2018 at 9:55 PM Dave Wallace <dwallacelf@...> wrote:

Assuming that you have followed the install VPP from binary recipe [1], then you can install vpp 18.01-release artifacts as follows:

sudo apt-get install vpp=18.01-release vpp-lib=18.01-release

Hope this helps,
-daw-

[1] https://wiki.fd.io/view/VPP/Installing_VPP_binaries_from_packages

 

On 02/14/2018 06:35 PM, Kawshik Sarkar wrote:

Hi,

Again the vpp latest stable has gotten updated and is non compliant with hc current  repo.

Please check attachment upper half.

I used this repo:
https://nexus.fd.io/content/repositories/fd.io.ubuntu.xenial.main/

Whats a workaround in these situations. I know which version i want but doing

sudo apt-get install vpp

just installs the latest and the greatest.

Is there a workaround. I know which vpp version to get but how do i get it?

BR

Kawshik

 

Assuming that you have followed the install VPP from binary recipe [1], then you can install vpp 18.01-release artifacts as follows:

sudo apt-get install vpp=18.01-release vpp-lib=18.01-release

Hope this helps,
-daw-

[1] https://wiki.fd.io/view/VPP/Installing_VPP_binaries_from_packages

On 02/14/2018 06:35 PM, Kawshik Sarkar wrote:

Hi,

Again the vpp latest stable has gotten updated and is non compliant with hc current  repo.

Please check attachment upper half.

I used this repo:
https://nexus.fd.io/content/repositories/fd.io.ubuntu.xenial.main/

Whats a workaround in these situations. I know which version i want but doing

sudo apt-get install vpp

just installs the latest and the greatest.

Is there a workaround. I know which vpp version to get but how do i get it?

BR

Kawshik