Specifically, when I try to use the /connect command the instructions call for I get: Permission Denied - You're not an IRC operator Yours, Joel

In effort to prevent IRC SPAM we are requiring registration in the FD.io channels. The following channels will require registration to join the channel https://wiki.fd.io/view/IRC Please follow these

Hi experts, I’m trying to download from git. https://gerrit.fd.io/r/vppsb But this URL is empty. Where is the code? I’d like to install VPP + Dnyamic Routing Protocol. /regards, Toru Nozaki

Hello, I'm trying to setup a BGP router using VPP with the router and netlink plugins and frrouting.org. A lot of things are already working, but it looks like OSPF IPv6 packets are not being received

Hi, I want to enable dynamic routing protocols (using Quagga or FRR as VPP does not have BGP and IS-IS built-in) to perform routing on my VPP VM (built using stable/1801 branch) using KVM hypervisor.

Hi, I'm in a satellite organiation trying to deploy FRR routing on a VPP server in my test lab.Question: 1)Is there any official installation guide to install frr on vpp? 2)Any document outlining how

Hello Hamid, I recommend that you try the experiment using the latest "master" levels of VPP and VPPSB. There were some small changes made around October so that they would compile. I just tried that

Greetings FD.io community! We apologize for the relatively late notice, as this normally would have been communicated earlier. The Linux Foundation has connected with a new vendor called Groups.io, wh

So, for the control plane, we can use e.g., FRR that will populate Linux's FIB and MPLS table. Then, we need to sync this info to VPP's FIB and VPP's MPLS table. While the "router plugin" provides sup

If you mean the router plugin from the sandbox, the short answer is yes, it doesn't support any of these. Better approach is to use Honeycomb, with or without ODL. Ray K

Hi, Does router plugin support the following features? 1) Multiple VRFs 2) MPLS From our initial experiments, the above features are not supported. Multiple VRFs do not work (I tried with namespaces).

Hi, Does router plugin (vppsb) support MPLS? We would like to use FRR's LDP in the control plane and VPP in the data plane. Thanks, Michael.

Hi, I want to glue VPP with FRRouting with Router plugin. I followed this guide and ip fib is synced successfully. But, i want also use FRR for some mpls family protocols. Is "Router" plugin still my

Hi, I can see in "vppsb/netlink/librtnl/mapper.h" that each Linux namespace is mapped to a separate FIB in VPP. However, the 4.6 Linux kernel has support for VRFs (e.g., using "ip link add dev NAME ty

Hi I read the wiki of router plugin here. But here says: The following command instructs the data plane to redirect ARP traffic to the tap interface named vpp0. In case the tap does not exist, it is c

Hello, These days I am trying to use "turbotap" plugin in vpp under CentOS 7 system. But I failed to build the plugin following the steps in the page: https://wiki.fd.io/view/VPP_Sandbox/turbotap when

int poll (struct pollfd *__fds, nfds_t __nfds, int __timeout) { int rv = 0; errno = EOPNOTSUPP; rv = -1; return rv; } 王辉 wanghui IT开发工程师 IT DevelopmentEngineer 虚拟化南京四部/无线研究院/无线产品经营部 NIV Nanjing Dept.

int poll (struct pollfd *__fds, nfds_t __nfds, int __timeout) { int rv = 0; errno = EOPNOTSUPP; rv = -1; return rv; } 王辉 wanghui IT开发工程师 IT DevelopmentEngineer 虚拟化南京四部/无线研究院/无线产品经营部 NIV Nanjing Dept.

Hi Neale, In the router plugin, the code below ("vppsb/router/router/tap_inject.c") should make sure that incoming multicast packets are forwarded from VPP to Linux. However, it does not work if "FIN_

Hi Michael, do you really need the router plugin? Based on the commands you’re using it seems you’re adding routes using the vpp cli interface, which is not how the router plugin is supposed to work.